New air conditioning that cools evenly, runs quietly and lasts — starting with a proper survey and finishing with a fully tested system.
Two identical air conditioners can perform completely differently depending on how they are installed. An oversized unit short-cycles and leaves rooms clammy; an undersized one runs flat out and never quite catches up. Pipework that is not vacuumed traps moisture that slowly damages the compressor, and a poorly placed outdoor unit recirculates its own hot air.
Our installation service is built to avoid all of that. We calculate the cooling load of each room, recommend the right capacity and type, and position indoor and outdoor units for airflow, access and noise. Every system is pressure-tested, evacuated with a vacuum pump and commissioned with real readings before we hand it over.
The result is a system that reaches temperature quickly, holds it steadily and uses no more electricity than it needs to — with a clean, professional finish you will be happy to look at every day.
Most single-room installations are completed in one visit. Larger projects are scheduled in clear stages so you always know what is happening.
We measure the room, check sun exposure, insulation and occupancy, and identify the best indoor and outdoor positions.
You receive a written proposal with capacity, model options, pipe run length and a fixed installation price.
Furniture is protected, wall cores are drilled cleanly and brackets are fixed to suit the wall type.
Copper lines are flared precisely, insulated and run with drainage falling correctly to avoid leaks.
Joints are tested under pressure and the system is evacuated to remove moisture and air.
We record pressures and temperatures, set up the remote or controller and show you how to get the best from it.
A bedroom benefits from a quiet inverter split with a gentle sleep mode. An open-plan office may be better served by ceiling cassettes that spread air evenly. Homes with several rooms often suit a multi-split or ducted system that keeps the exterior uncluttered.
We talk through how the space is actually used — who is in it, when, and what matters most — before recommending anything. Where an inverter model will repay its higher price through lower running costs, we will show you the numbers.
No hidden extras for the essentials. Longer pipe runs or special access are always quoted upfront.
Capacity based on room size, heat gain and use.
Rated for the unit weight and the wall type.
Condensate lines with proper fall, routed neatly.
Every joint checked before refrigerant is released.
Moisture removed to protect the compressor.
Readings and warranty details recorded for you.
Every installation is different. If your question is not answered here, our team will happily talk it through.
A standard wall-mounted split usually takes three to five hours. Multi-room, cassette and ducted systems are scheduled over one or more days depending on the scope.
Yes. We will check the model suits the room first, then install it to the same standard as the systems we supply.
We can safely recover refrigerant, remove the old unit and make good the wall openings as part of a replacement quote.
It depends on room size, ceiling height, windows, sun exposure and how many people use the space. Our free survey answers this precisely.
View service
View service
View service
View service
View service
Book a free site survey and get a clear, fixed installation quote.
